0121 296 8768.

Battenhall Case Study

by Sophie on 21st February 2017



Battenhall Case Study

Products Used:

This project was one that required a lot of attention to detail due to all the varying factors that were involved in this build. From the glazing element, the brief was for a fly away corner that was to disappear into a pocket into the wall.

Framemaster was able to achieve this by using our Aluminium range of doors and drafting up a bespoke solution to the requirement of the customer to incorporate a pocket slider.

The rooflight was a must and was required to be as large as possible, the agreed and installed size was 3m x 2m.

Our flat rooflights are triple glazed and offer a U Value of 0.8.

Framemaster were very much involved in all aspects of the build and was in constant contact with the builder and structural engineer to offer advice and weights for the installation of a cantilevered roof and Zinc finishings.

Framemaster provides a range of home improvement products from Conservatories to Windows and even the finishing touches of guttering.

If you would like a FREE quote from Framemaster, then please contact us on 0121 296 8768.

 


Comments are closed.